T5 Timer Controller with AC Power Piggy Back Cord

• Waterproof Enclosure: This timer is equipped with a waterproof and corrosion-proof IP65 (NEMA 4X) enclosure. This makes it suited for corrosion-proof and wet outdoors and production floors.

• Buzzer: The T5 Digital Display Process Timer features the loudest buzzer on the market! It produces 103dB warbling buzzer sounds that can easily cut through the loudest industrial noise.

• Compactness: Unlike other industrial timers, AC Power T5 Timer Controller possesses a compact footprint, which makes it suitable for all industrial environments.

• Relay Output: The relay output of the timer can easily control other devices using the piggyback cord at its back.

• Operating Modes: There are switches in the box that allows you to choose different operating modes. The following are a few common operating modes:

Mode 1: This is the default mode where the timer counts down from the set time. In this mode, you can easily cancel the cycle by pressing the start button.

Mode 2: This mode works similarly to mode 1 but it doesn’t allow cancellation.

Mode 3: This mode enables the mechanical triggering of the time cycle with a proximity switch. This proximity switch is a type of closed contact, which remains shut throughout the countdown process.

Mode 4: This allows cycle restart after pausing. This restarting can be done until the time accumulates to the value set.

Mode 5: The timer stops automatically at the cycle’s end.

Mode 6: This mode provides an early warning on the LED.

Mode 7: This is a guard duty mode, which requires you to continue pressing the button to avoid continuous alarm buzz.

Mode 8: It is employed during plating applications to set the timing for spray rinses.

Mode 9: It is the countdown for the machine to run down.

Mode 10: This is the on-delay mode.

Mode 11: It is the repeat cycle.

Mode 12: This mode sets off-delay for the relay.