TDEPD Digital Pressure Transducer with LED Dispay, 4-20 mA Output and 1 Relay

Transducers Direct

€432,10
(No reviews yet) Write a Review
SKU:
TDEPD3010003Q9
Weight:
2.00 LBS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added

Introducing the TDEPD Field Programable Pressure Transducer with Built In LED Display, Analog Output and Relays

Pressure transducer with an LED readout scrolls 360° or can be locked in position. Color-coded display tells you if pressure is excessively high or low without reading values.

Features:

  • Totally electronic design
  • 4-digit, bi-color display (Red or Green)
  • High or low current, relay output
  • Custom pressure ranges and outputs available up to 10K pig
  • Analog and digital outputs
  • Solid stainless steel header/diaphragm
  • Pressure ranges up to 10K psi
  • UL recognized component
  • 0.5% accuracy
  • Factory-programmable set point and hysteresis
  • Spike Monitoring Technology ™
  • Oxygen cleaning available

What makes the patented TDEPD Series stand apart is the unique LED display - which allows for 360° scrolling, or you can lock the display in one location. It also features field-programmable set points and hysteresis.

Because it is built on Transducers Direct’s TD1000 technology, the TDEPD Series incorporates redundant sensing elements, allowing for notification that the sensor needs to be replaced should one of the sensing elements fail (maintenance mode), eliminating operational downtime.

The TDEPD Series pressure switch/transducer comes standard with one digital output and optional analog output available. Unit operates from 10.5 to 28 VDC, and is IP67 certified.

Electrical Connection
5-Pin M12

  • Pin 1: Power supply: 10.5 VDC to 28 VDC
  • Pin 2: Digital output #2 (optional) or analog output (optional)
  • Pin 3: Power supply common
  • Pin 4: Digital output #1
  • Pin 5: Maintenance mode output

tdepd-electrical-.jpg

 Ordering:

tdep-ordering-dia.jpg

 Specifications:

Performance 

   

Performance @ 25°C (77 °F)

Accuracy 

   

0.5% of maximum operating x pressure

 

Overange 

   

2x Rated Pressure or optional 4x and 10x 

Pressure Range 

   

see ordering chart - up to 10,000 psi (689 bar)

Burst Pressure 

   

5x or 20,000 psi, whichever is less 

Pressure Cycles

   

>100 Million

Update Time

   

<=1msec

Environmental Data

   

 

Temperature

   

 

Compensated Temperatures 

   

-40 to 85 C (-4 to 185 F)

 

Operating Temperature

   

-40 to 100 C (-40 to 212 F)

Storage Temperature

   

-40 to 125 C (-40 to 257 F)

TEB

   

1% BFSL (includes: Non-Linearity, Hysteresis and Non-repeatability), analog output

Long Term Drift

   

0.2% FS/year (non-cumulative)

Shock

   

50g, 11 ms, 1/2 sine

Vibration

   

10g, peak, 20 to 2400 Hz

EMI/FRI Protection

   

Yes

Rating

   

Up to IP-67

Mechanical Configuration

   

 

Pressure Connections

   

1/4” NPT Male, 7/16-20 UNF, G1/4 Male

Wetted Materials

   

17-4PH stainless steel (for other material consult factory)

Electrical Connection

   

M12 (5-pin)

Case

   

(housing) 304 stainless steel and high impact resistant polycarbonate display

Electrical Data

   

 

Power Supply

   

10.5-28VDC

Switch/Analog Output

   

10.5 VDC to 28 VDC at 250 mA max (PNP) or 200 mA max (NPN) (digital), Field-programmable: voltage up to 10 VDC or current up to 20mA

Output Impedance

   

<100 Ohms, Nominal

Current Consumption

   

30 mA @ 24 V / voltage output

40 mA @ 12 V / voltage output

50 mA @ 24 V / voltage output

60 mA @ 12 V / voltage output

Output Noise

   

<2mV RMS

Reverse Polarity Protection

   

Yes

Set Points

   

No set points in vacuum range, 5 psi min set point with <100 psi range, 10% of configured pressure min set point with > 100 psi range. 

Spike Counter 

   

Press button #1 for 10 seconds to view quantity of pressure spikes and the highest spike seen. 

Zero/Tare Display

   

Press button #2 for 10 sec. If the pressure reading on the display is between -14.7 and 128 psi, the display will change to zero (0). If pressure is above 128 psi, display will not change.