Manufactured by SeaMetrics this water meter is used exclusively with Stenner pumps connected the Stenner PCM (Pump Control Module)
For each gallon of water that passes through the water meter a single pulse will be delivered to your controller or pump control module. By doing this you effectively create a proportional feed system that paces your pump with the increase in water flow.
Each meter is shipped with unions and tail pieces.
Other pulse rates available. Please call if you have any questions.
We Stock these so there is never a wait.
Stenner 3/4" Water Meter with pulse output, 1 pulse per gallon
x
Stenner Plastic Body Water Meter for Low Lead compliance or a Lighter Option. NSF/ANSI-372 (low lead) certified. 3/4" Dimensions (7.5" x 11.5" x 1" x 3/4") For each gallon of water...
x
Stenner Plastic Body Water Meter for Low Lead compliance or a Lighter Option. NSF/ANSI-372 (low lead) certified. 1" Dimensions (10.25" x 15.25" x 1.25" x 1") For each gallon...
x
Stenner Plastic Body Water Meter for Low Lead compliance or a Lighter Option. NSF/ANSI-372 (low lead) certified. 1.5" Dimensions (10.25" x 15.25" x 1.25" x 1") For each gallon...
Technical Specification of Stenner Stainless Steel Water Meter
SSMRS20-1PPG
SSMRS20-2PPG
SSMRS20-4PPG
Pulse Per Gallon
1 pulse/gallon
2 pulse/gallon
4...
x
Stenner Plastic Body Water Meter for Low Lead compliance or a Lighter Option. NSF/ANSI-372 (low lead) certified. 3/4" Dimensions (7.5" x 11.5" x 1" x 3/4") For each gallon of water...
x
Stenner Plastic Body Water Meter for Low Lead compliance or a Lighter Option. NSF/ANSI-372 (low lead) certified. 1" Dimensions (10.25" x 15.25" x 1.25" x 1") For each gallon...
If you need NSF Meters use the MJN SERIES CLICK HERE
Not Compliant with California Health & Safety Code Section 116875 (AB1953) or Vermont Act No. 193 for Human Consumption...
SPECIFICATIONSModel: EZB21D1-VC
0 to 1.5 GPH
60 PSI
115 VAC
3/8" Tubing Connections
(All options available please call for different Voltage or Liquid End)
OVERVIEWWalchem...
x
Stenner Plastic Body Water Meter for Low Lead compliance or a Lighter Option. NSF/ANSI-372 (low lead) certified. 1.5" Dimensions (10.25" x 15.25" x 1.25" x 1") For each gallon...
MJN-Series meters use the multi-jet principle, which has been an internationally-accepted standard for many years. This type of water meter is known for its wide range, simplicity, and...
Pumps
Water Treatment Chemicals
Solutions
Water Treatment Equipment
Water Problems & Solutions
Restaurant / Janitorial
Brands
