Sensors

A sensor converts the physical action to be measured into an electrical equivalent and processes it so that the electrical signals can be easily sent and further processed. Inline monitor and controller sensors are devices used within industrial systems to continuously measure and regulate various parameters of fluids or gases as they flow through a pipeline or process line. Sensor measures the variable or parameter to be controlled.

Sidebar Sidebar Sidebar
  • Myron L CSAR Low cost Cond/TDS 75 psi @ 60°C with 1000 Ω RTD

    Myron L

    Myron L CSAR Low cost Cond/TDS 75 psi @ 60°C with 1000 Ω RTD

    DESCRIPTION Wetted materials of construction are ABS plastic, with 316 Stainless Steel electrodes. An integral temperature element provides for automatic temperature compensation on both the CSATC and CSAR. The thermowell containing the temperature...

  • Myron L CSATC Low cost Cond/TDS 75 psi @ 60°C

    Myron L

    Myron L CSATC Low cost Cond/TDS 75 psi @ 60°C

    Rs20,045.03
    DESCRIPTION Wetted materials of construction are ABS plastic, with 316 Stainless Steel electrodes. An integral temperature element provides for automatic temperature compensation on both the CSATC and CSAR. The thermowell containing the temperature...
    Rs20,045.03

    Add to Cart The item has been added
  • Myron L CSA Low cost Cond/TDS

    Myron L

    Myron L CSA Low cost Cond/TDS

    DESCRIPTION Wetted materials of construction are ABS plastic, with 316 Stainless Steel electrodes. An integral temperature element provides for automatic temperature compensation on both the CSATC and CSAR. The thermowell containing the temperature...

  • Myron L CS60 Conductivity/TDS 100 psi @ 120°C, Teflon®/Kynar®

    Myron L

    Myron L CS60 Conductivity/TDS 100 psi @ 120°C, Teflon®/Kynar®

    DESCRIPTION Wetted materials of construction are CPVC or Teflon®*/Kynar®†, with 316 Stainless Steel electrodes as standard. The  option to select other metals as electrode materials provides an unequalled chemical resistance...

  • Myron L CS50 Conductivity/TDS 100 psi @ 95°C, CPVC

    Myron L

    Myron L CS50 Conductivity/TDS 100 psi @ 95°C, CPVC

    These sensors are designed for use in general purpose applications up to approximately 20,000 µS/ppm, and provideoutstanding chemical resistance. Open front end geometry resists clogging and reduces maintenance requirements to a minimum. Wetted...

  • Myron L CS41 Conductivity/TDS or Resistivity 100 psi @ 150°C

    Myron L

    Myron L CS41 Conductivity/TDS or Resistivity 100 psi @ 150°C

    The Myron L Model CS41 sensor was designed for high pressure, high temperature Conductivity & Resistivity measurements, and is an ideal choice for boiler control applications. Blowdown control, condensate monitoring, leak detection on heat...

Compare 0

Why They Are Important?

  • Process Efficiency: Optimize industrial processes by ensuring conditions are consistently maintained at optimal levels.
  • Quality Control: Ensure the final product meets required standards by precisely controlling process parameters.
  • Safety: Prevent hazardous conditions by monitoring and adjusting potentially dangerous parameters.
  • Cost Savings: Reduce manual labor and downtime by automating monitoring and control tasks.

Elevate your process control with Cannon Water, the premier supplier of Myron L monitor & controller sensors. Our high-performance sensors are designed to provide accurate, real-time measurements of essential parameters such as pH, conductivity, and temperature.