Pyxis
Pyxis
CR-200 | Wireless LPR Corrosion Sensor
LPR Corrosion Sensors vs. Corrosion Coupons:
LPR corrosion rate monitoring is a valuable tool that can be easily and affordably deployed to provide both general and localized corrosion measurements instantly. There is a common industrial misnomer that the use of inline LPR corrosion sensors should be identical to corrosion coupons. The LPR Corrosion level represents the real-time electrochemical measurement of corrosion. Measurements gathered from the CR-200 are instant & represent “real-time conditioning” on an MPY scale based on the metallurgy being assessed.
The CR-200 corrosion rate sensor is ideal for cooling and process water treatment monitoring where robustness and affordability are a must. The sensor utilizes the linear polarization resistance (LPR) method to produce a raw signal. The raw signal is conditioned, amplified and digitized directly in the sensor itself. This avoids the interferences and attenuation of the raw signal caused by long distance wiring needed for other corrosion sensors. Our corrosion sensors measure sample water conductivity directly and compensate for the conductivity impact on LPR measurement. These unique product characteristics make the Pyxis Lab® LPR superior in performance and accuracy. In addition to the LPR measurement used to obtain the general corrosion rate, the CR-200 sensor also measure for electrochemical noise. The measured noise data is used to calculate an index to quantify the localized corrosion rate also referred to as pitting.
Typical Applications:
- Cooling & Process Water Monitoring
- Domestic Water Monitoring
Features:
-
- Anti-Electromagnetic Interface (anti-EMI) Design with Stainless Steel Sensor Body
- Modbus Support with Isolated RS-485 Communication
- 4–20mA Output
- Battery Life up to 1 Year using Ultra-Low Power Design & Smart Power Management
- Three O-Ring Grooves Positioned on Sensor Body for Insertion Depth Control
- Bluetooth® Connectivity to uPyxis® App
- Ultra-Low Corrosion Rate down to 0.001MPY
- Accurately Measure Generalized Corrosion & Localized Corrosion Rate
Specifications:
CR-200 Wireless LPR Corrosion Sensor | |
---|---|
P/N | 51006 |
Power Supply | 3.6V ER2500 Battery |
Output | Bluetooth® 5.0 32ft (10m) Line of Sight |
Data Storage | 6 Months (30 minutes per sample) |
Dimensions | 10.3inch (260.5mm) Long, 0.9in (23.0mm) Diameter Lower, 1.7in (43.0mm) Upper |
Weight | 655g with Battery |
Cable Length | None |
General Corrosion Range | 0.001–10MPY |
Conductivity Compensation | 10–10,000µS/cm |
Sample Temperature | -20–50 ºC |
Reading Interval | 3 to 1440 minutes |
Resolution | 0.001 MPY |
Alloy Factor | 0–3 (1 as Default) |
Installation | Flow Cell with 1in NPT |
Enclosure Material | 304 Stainless Steel |
Working Pressure | Up to 100psi (7 Bar) |
Temperature | Working: -10–50 ºC Storage: -20–70 ºC |
Protection | IP65 |
Regulation | CE |