Pyxis HM-500 Oil In Water Sensor (0-10ppm)

Previous Next

Pyxis HM-500 Oil In Water Sensor (0-10ppm)

No reviews yet

Write a Review

SKU: 52101

Weight: 0.37 LBS

Shipping: Calculated at Checkout

﷼24,198.93

Current Stock:

Quantity:

Checkout securely with:

Description
Product Reviews

Description

The Pyxis Lab® HM-500 series of inline fluorometer sensors measure the concentration of oil in water, read as ppm Marine Crude-Offshore Oil. The sensors utilize an LED sourced UV-fluorescence methodology at 365nm wavelength & 410/470nm excitation. Our HM-500 series of sensors are uniquely designed with extra photo-electric components that also monitor the color & turbidity of the sample water. This proprietary feature enables the HM-500 series to automatically compensate for color and turbidity in the water sample eliminating interferences commonly associated with real-world waters, up to 150NTU. These sensors have a short fluidic channel and can be easily cleaned.

The fluidic & optical arrangement of the HM-500 series are designed to overcome short comings associated with other fluorometers that have a distal sensor surface or a long, narrow fluidic cell. Traditional inline fluorometers are susceptible to color/turbidity interference & fouling and can also be very difficult to clean. These unique features provide the HM-500 series with a level of accuracy far greater than conventional inline oil in water sensors & enable users to conduct wireless inline sensor cleanliness diagnostics as a predictive measure via the uPyxis® for mobile and desktop devices.

Features

PROVIDED with the ST-001 Inline Tee Assembly 3/4inch FNPT/CPVC
Offers a 304 Stainless Steel 3/4inch FNPT variant for Harsh Applications
Submersion Adapter Kit (MA-102S) Available for CPVC Submersed Applications
Unique Design with Extra Photo-Electric Components
Automatically Compensates for Color & Turbidity Contamination
Flexible/Advanced Communication 4-20mA Output & RS-485 Output
Connectible to ANY Conventional Microprocessor Controller, PLC or DCS
Bluetooth® Enabled when used with the MA-WB or PowerPACK Series of Adapters
Bluetooth® Wireless Interface via uPyxis® app
uPyxis® allows for Sensor Cleanliness Diagnostics, Calibration & Configuration
uPyxis® allows users to Write Calibration to Sensors for a Variety of Oils as ppm
Lower Cost & Higher Accuracy vs Conventional UV Fluorometers for Oil in Water

Typical Applications

Heat Exchanger Leak Detection
Oil Tank Leakage Detection
Intake Water Monitoring (UF & RO Feedwater)
Reinjection Water Monitoring
Industrial Wastewater Monitoring
Marine Discharge Monitoring
Plant Runoff / Storm Water Monitoring

Specifications

ST-500 Inline PTSA Sensor
P/N	50661
PTSA Output Scale Adjusted via uPyxis®	0–200ppb
PTSA Maximum Range Adjusted via uPyxis®	0–300ppb
PTSA Precision/Accuracy	±1ppb
Excitation/Emission	LED 365/410nm
Power Supply	22–26VDC, Power Consumption – 1W
Outputs	Isolated 4–20mA Analog Outputs & Isolated RS-485 Digital Output – 7Pin
Installation	ST-001 Inline Tee (Provided) 3/4″ FNPT Socket & Thread
Weight	170g (0.37lbs)
Operational Pressure	100psi (6.9 Bar)
Operating Temperature	4–49 ºC (40–120 ºF)
Storage Temperature	-20–60 ºC (-4–140ºF)
Material	CPVC
Rating	IP67, Fully Dust-Proof & Water-Proof
Regulation	CE Marked + RoHS
Dimensions	6.8in (172.7mm) Length, 1.44in (36.6mm) Body Diameter
Cable Length	5ft, Terminated with IP67 adapter + 1.5ft Flying Lead with IP67 Adapters