ISOMAG MS2500 Flanged Electromagnetic Flow Sensor

The MS2500 flow meter combines reliable full-pipe flow measurement with high accuracy, low cost and ease of installation.

Several converters for control and interfacing are available for this flow sensor.

Features

• Accuracy to +/-0.2% of rate from 1 to 33 ft/sec.
• Nineteen sizes from 1″ to 48″ Pipe Diameters.
• Flow ranges from 2.37 to 179,400 GPM.
• Pressures to 5600 PSI.
• Volumetric flow rate measurement independent of fluid viscosity, density and temperature.
• No moving parts for zero maintenance.
• Bi-directional flow measurement.
• No pressure drop through sensor.
• Standard integral ground electrode.
• Minimal straight pipe run required.
• Every sensor is factory wet-calibrated.

Dimensions

Specifications

• Repeatability: ±0.1%
• Temperature (max liquid temperature)
  -4 to 158°F (-20 to 70°C) with Rilsan lining
  32 to 140°F (0 to 60°C) with Polypropylene lining
  23 to 176°F (-5 to 80°C) with Ebonite lining
  -4 to 212°F (-20 to 100°C) with PTFE lining compact version
  -4 to 356°F (-20 to 180°C) HT PTFE (PFA) lining remote version
• Fluid Conductivity: 5 μS/cm (min)
• Process Connections: ANSI Flange
• Liner Material: PTFE, PFA, Ebonite, Polypropylene, Rilsan or Abral
• Standard Pressure (ANSI 150 Flanges) Higher pressures upon request.
  Polypropylene & Rilsan: 275psi
  Ebonite: 928psi
  PTFE: 580psi / PFA 232psi
• Flow Tube: 304 S.S.
• Body & Flange Material: Carbon steel with twopart epoxy coating (316 SS optional)
• Electrode Material: 316 SS, Hastelloy C, Titanium, Tantalum or Platinum
• Number of Electrodes: 3 (2 measure, 1 ground)
• Environmental Rating: NEMA 6/6P

Downloads

MS2500 Datasheet

MS2500 Operation Manual