Lovibond MD 100 Colorimeter: Boiler Water Kit.
- Lightweight, rugged design for use in the field
- Single unit construction with no parts to lose or break
- Large, easy to read display
- Industry specific parameter combinations available
Most faults in steam production plants occur as a result of deficient monitoring and control of the boiler water. This includes, in particular, the formation of scale, corrosion and local overheating. Therefore, a regular treatment and testing protocol of the boiler water is critical. By using the MD 100 Boiler Water colorimeter system, you have an overview of the key parameters of your boiler water and can perform purposeful water treatment at all times.
- Instrument in plastic case
- Adapter for ø 16 mm cuvettes
- Adapter for ø 13 mm cuvettes
- 4 micro batteries (AAA)
- 3 round cuvettes (glass) with lid
- 3 round cuvettes ø 16 mm (glass) with lid
- Sealing rings
- Stirring rod
- Syringe (20 ml)
- Measuring Beaker (100 ml)
- Plastic centrifuge tubes
- Instruction manual
- Quick Start Guide
- Certificate (COC)
The MD 100 has several key features that make it a favorite among users.
- Waterproof Design
The IP 68 design of this instrument ensures that the MD 100 remains water tight for up to 1 hour at 0.1 meter.
Don't worry about dropping the instrument into a body of water - it floats!
- Accurate, Reproducible Results
The optical system of the MD 100 utilizes LEDs and interference filters
which quickly gives you results that you can be confident in.
- User Calibration Mode
A one-point calibration is possible.
Additionally, all MD 100 instruments have the ability to display readings directly in ABS or %T units.
- One-time-Zero Function
Don't waste time waiting for your instrument to Zero after each test.
When testing a new sample, zero the instrument once and all subsequent tests of that sample do not require you to re-zero the instrument.
- Automatic Data Storage with Transfer Capabilities
The MD 100 automatically stores the last 16 readings with time and date stamp.
These results can be transferred to a spreadsheet using the IRiM accessory.
- Ergonomic Design
Whether you're using the MD 100 out in the field or in the lab, the design of the instrument makes it easy to handle and view the display.
If you're using the instrument in the lab, the rubber feet on the bottom of the housing eliminates the need for two hand operation or to chase your instrument around the workbench.
- Factory Programmed
All MD 100 instruments are supplied ready to use with up to 14 calibration curves.
All you need to do is select the test you need, prepare your sample and test!
- Scroll Driven Menu System
The simple interface allows you to quickly reach the test you need.
When the instrument is turned on, it will automatically display the last test used.
|Optics||LEDs, interference filters (IF) and photo sensor in transparent sample chamber. Depending on the version, up to 3 different interference filters are used. Wavelength specifications of interference filters:
430 nm Δλ = 5 nm
530 nm Δλ = 5 nm
560 nm Δλ = 5 nm
580 nm Δλ = 5 nm
610 nm Δλ = 6 nm
660 nm Δλ = 5 nm
|Wavelength Accuracy||± 1|
|Photometric Range||-2600 - 2600 mAbs|
|Photometric Accuracy||3 % FS (T = 20 °C – 25 °C)|
|Display||backlit LCD (on keypress)|
|Suitable Vials||Round Cuvettes 24 mm|
|Calibration||factory calibration and user calibration. Reset to factory calibration possible|
|Internal Storage||internal ring memory for 16 data sets|
|Power Supply||4 micro batteries (AAA)|
|Battery Life Time||approx. 17 hours|
|Auto – OFF||Yes|
|Clock||Real Time Clock and Date|
|Environmental Conditions||Temperature: 5 - 40 °C rel. humidity: 30 - 90 % (non condensing)|
|Protection Class||IP 68|
|Testparameter||Measuring Range||Method No.||Chemical Method|
|Aluminium PP||0.01 - 0.25 mg/l Al||M50||Eriochrom Cyanine R|
|Chloride L (A)||0.5 - 20 mg/l Cl-||M92||Mercury Thiocyanate / Iron Nitrate|
|Copper T||0.05 - 5 mg/l Cu||M150||Biquinoline|
|DEHA PP||0.02 - 0.5 mg/l DEHA||M167||PPST|
|Hydrazine P||0.05 - 0.5 mg/l N2H4||M205||Dimethylaminobenzaldehyde|
|Iron LR L (A)||0.03 - 2 mg/l Fe||M225||Ferrozine / Thioglycolate|
|Oxygen dissolved C||10 - 800 µg/l O2||M292||Rhodazine D TM|
|Phosphate HR L||5 - 80 mg/l P||M335||Vanadomolybdate|
|Polyacrylate L||1 - 30 mg/l Polyacryl||M338||Turbidity|
|Silicate HR PP||1 - 90 mg/l SiO2||M352||Silicomolybdate|