NanoTron Dual Timer Controller (NANO-F2)

NanoTron Dual Timer Controller-F2

(No reviews yet) Write a Review

$474.00

Brand:: Advantage Controls
SKU:: NANO-F2
Weight:: 2.00 LBS
Shipping:: Calculated at Checkout

Description
Write a Review

The NanoTron digital timer controller provides a compact dual relay microprocessor based controller with many standard features and the flexibility to adapt to a variety of applications.

The NanoTron's simple step through menu provides user-defined configuration of two timers that can operate independently.

Key Features:

Compact Design
Simple Step Through Menu
NEMA 4X Enclosure
Raised Dome Keypad
User Selectable Timers
Non-Volatile Memory
2 Year Warranty
1 or 2 Water Meter Inputs
2 drum low level inputs
Flow Switch Input
Dual Accumulators
Prewired Configuration

Applications:

NanoTron dual selectable timers are designed to automate the addition of various chemicals or activate other devices via a relay output. All units include:

Two totalizing water meter inputs that can be configured for contacting head or hall effect meter inputs in gallons or liters.
Two drum level inputs that can be set to disable the relay outputs.
Two mechanical relay outputs with normally open and normally closed contacts that can be configured for powered or dry contact relay operation.
A 'force on' timer that allows for manual activation of the relays for a user defined amount of time.

Tip: Connect a momentary push-button to the water meter input cable to create a remote start. Great for batch feeding of chemicals using a pump or timed activation of a motor or solenoid.
Both timers can activate off one input or connect two buttons for independent control.

Functions:

All timers can be programmed independently as one of the following types:

Pulse Timer - Accepts dry contact pulses from a water meter (supplied separately). It can accumulate 1-9999 pulses to activate the timer to run from 0-99 minutes, 59 seconds in minutes and seconds.
Recycle Timer - Provides a user defined 'off' cycle in HH:MM and a user defined 'on' cycle in MM:SS that is repeated constantly.
28-Day Timer - 28-day feed timers, typically used for biocide feed are based on a 28-day cycle with two independent programmable feed cycles allowing for feed on selectable days and weeks. Has short-cut modes to save time programming.
Batch - Timer activated by the Force On/Off key for a user defined run time.

Note: Alternate batch can be performed in pulse timer mode by connecting buttons to water meter inputs and setting 1 pulse to start a user defined run time.

NanoTron Dual Timer Controller