NanoTron Dual Timer Controller-F2

Advantage Controls

﷼130,560.46
(No reviews yet) Write a Review
SKU:
NANO-F2
Weight:
2.00 LBS
Shipping:
Calculated at Checkout
Adding to cart… The item has been added
The NanoTron digital timer controller provides a compact dual relay microprocessor based controller with many standard features and the flexibility to adapt to a variety of applications.

The NanoTron's simple step through menu provides user-defined configuration of two timers that can operate independently.

Key Features:
  • Compact Design
  • Simple Step Through Menu
  • NEMA 4X Enclosure
  • Raised Dome Keypad
  • User Selectable Timers
  • Non-Volatile Memory
  • 2 Year Warranty
  • 1 or 2 Water Meter Inputs
  • 2 drum low level inputs
  • Flow Switch Input
  • Dual Accumulators
  • Prewired Configuration
Applications:
NanoTron dual selectable timers are designed to automate the addition of various chemicals or activate other devices via a relay output. All units include:
  • Two totalizing water meter inputs that can be configured for contacting head or hall effect meter inputs in gallons or liters.
  • Two drum level inputs that can be set to disable the relay outputs.
  • Two mechanical relay outputs with normally open and normally closed contacts that can be configured for powered or dry contact relay operation.
  • A 'force on' timer that allows for manual activation of the relays for a user defined amount of time.
Tip: Connect a momentary push-button to the water meter input cable to create a remote start. Great for batch feeding of chemicals using a pump or timed activation of a motor or solenoid. 
Both timers can activate off one input or connect two buttons for independent control. 
 
Functions:
All timers can be programmed independently as one of the following types:
  1. Pulse Timer - Accepts dry contact pulses from a water meter (supplied separately). It can accumulate 1-9999 pulses to activate the timer to run from 0-99 minutes, 59 seconds in minutes and seconds.
  2. Recycle Timer - Provides a user defined 'off' cycle in HH:MM and a user defined 'on' cycle in MM:SS that is repeated constantly.
  3. 28-Day Timer - 28-day feed timers, typically used for biocide feed are based on a 28-day cycle with two independent programmable feed cycles allowing for feed on selectable days and weeks. Has short-cut modes to save time programming.
  4. Batch - Timer activated by the Force On/Off key for a user defined run time.

Note: Alternate batch can be performed in pulse timer mode by connecting buttons to water meter inputs and setting 1 pulse to start a user defined run time.


NanoTron Dual Timer Controller