Categories

 Loading... Please wait...
show / hide sidebar

Categories

CS400P-5 Closed System Corrosion Inhibitor Treatment, 5 Gallon Pail

Cannon Water Technology Inc.

$99.95
SKU:
CS400P-5
Weight:
55.00 LBS
Shipping:
Calculated at checkout
Quantity:

Need Some Advice?Speak to one of our gearheads

Product Description

CS400P-5 Closed System Corrosion Inhibitor Treatment 5 Gallon Pails

 

Designed to be low cost, less toxic and ships by UPS further reducing your cost and time to receive products

 ups-2.png 

Helps Prevent Corrosion in Closed Hot and Chill Water Systems

 

Product Description 

  • Unique blend of Nitrite/Borax based corrosion control compounds for iron and steel metal protection. CS400P-5 contains a visible red dye..
  • Incorporates an organic azole compound resistant to oxidizing degradation for corrosion control of yellow metal compounds, copper and brass.
  • Has dedicated iron oxide dispersants to retard rust deposits plugging lines and creating under deposit corrosion cells.
  • Forms a resistant protective barrier film on metal surfaces that helps prevent oxygen from attacking metal surfaces.
  • pH buffered with a borax for long term pH stability.
  • Utilizes a polymeric dispersant to help reduce Calcium Hardness scale from forming on heat exchanger surfaces.
  • Compatible with Ethylene Glycol/Propylene Glycol/GreenFrost-100 anti-freeze chemicals.

 

CS400P-5 Application Rate and Control Parameters

  • CS400P-5 should be fed at a rate of 1 gallon per 100 gallons of water in the closed system.
  • Use Nitrite Test Kit P.N. CNTK3300-Z to test for CS400P. The recommended test range is 800 - 1200 ppm as Sodium Nitrite.

 

Physical Properties: CS402PD-5

Form:

Liquid

Color:

Light Red

Odor:

Slight Aromatic

pH:

12+/-

Density:

11.09#/gallon

Specific Gravity:

1.32

Freeze Point:

Approximately 32° F

Freeze/Thaw Recovery:

Complete

Ship Class:

Non Regulated

 

 

Contains:

Sodium Hydroxide/Sodium Nitrite

   

 

 

 

 

 

Refer to the SDS for further health, safety and environmental information regarding this product. Information and recommendations in this bulletin are based on information believed to be reliable. However, the use of the product is beyond the control of Cannon Water Technology Inc. and no guarantee, expressed or implied, is made as to the effects of such the results to be obtained if not used in accordance with directions or established safe practice. The buyer must assume all responsibility, including injury or damage, resulting from misuse of the product as such, or in combination with other material.

 

Chill, Hot and Condenser Closed System Treatment: One Gallon Treats 100 gallons of water. Simple to test. Protects Iron, Steel, Brass and Copper. Contains a visible red dye. Ships by common carrier like UPS, FedEx or DHL. Non Regulated Material. 

 

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Shipping & Returns

Returns Policy

All returns must be authorized by Cannon Water Technology. Call Cannon Water Technology to obtain a return authorization number before shipping back to Cannon Water.

Buyer is responsible for return freight fees. A 15% restocking fee may apply. If the manufacturer has a higher than 15% restocking fee the higher amount will apply.

Cannon Water Technology will replace any defective or non working DOA (Dead On Arrival) equipment with same or like equipment within 30 days of receipt of equipment, except where items are on back-order and are needed to complete initial order. Thirty day return policy will go into effect when all equipment ordered is received. Cannon Water Technology will reimburse shipping fees only when item is deemed defective or non working DOA.

All returns must be in original packaging with all parts and manuals in resale-able condition. Any returned items not in resale-able condition, missing parts or manuals will be charged a 25% re-manufacture fee.

Under no circumstances can equipment that has been used for chemical service be returned for credit. We will make every effort to help you select the proper equipment before you purchase it.

If you have any questions about your application we can help you make the right choice. Call us at 1 800-230-1426 to speak with a technical support representative.

To obtain return authorization call us at 1 800-230-1426 or contact us in writing via e-mail: csd@cannonwater.com

Shipping Policy

You can trust that your order will be quickly processed and safely delivered. We can ship products anywhere in the United States, Canada and most countries using the shipping method of your choice. Please note that UPS cannot ship to post office boxes. When you place an order we will estimate delivery dates based upon the availability of your item(s), shipping method selected and your shipment's destination.

Processing Times

Most orders ship the same day if items are in-stock in our main California warehouse. Since we drop ship some products there may be a slight delay before orders actually ship out. We consider standard lead times to be within 3 days of order. In the event that a longer lead time is needed, we will do our best to keep you informed of these delays.

Credit Cards:

We only accept credit cards issued by USA Banks. International customers can use their credit cards via PayPal when checking out. PayPal does not require an account, just use the guest checkout with your debit or credit card.

Know more about Shipping Policy

Product Description

CS400P-5 Closed System Corrosion Inhibitor Treatment 5 Gallon Pails

 

Designed to be low cost, less toxic and ships by UPS further reducing your cost and time to receive products

 ups-2.png 

Helps Prevent Corrosion in Closed Hot and Chill Water Systems

 

Product Description 

  • Unique blend of Nitrite/Borax based corrosion control compounds for iron and steel metal protection. CS400P-5 contains a visible red dye..
  • Incorporates an organic azole compound resistant to oxidizing degradation for corrosion control of yellow metal compounds, copper and brass.
  • Has dedicated iron oxide dispersants to retard rust deposits plugging lines and creating under deposit corrosion cells.
  • Forms a resistant protective barrier film on metal surfaces that helps prevent oxygen from attacking metal surfaces.
  • pH buffered with a borax for long term pH stability.
  • Utilizes a polymeric dispersant to help reduce Calcium Hardness scale from forming on heat exchanger surfaces.
  • Compatible with Ethylene Glycol/Propylene Glycol/GreenFrost-100 anti-freeze chemicals.

 

CS400P-5 Application Rate and Control Parameters

  • CS400P-5 should be fed at a rate of 1 gallon per 100 gallons of water in the closed system.
  • Use Nitrite Test Kit P.N. CNTK3300-Z to test for CS400P. The recommended test range is 800 - 1200 ppm as Sodium Nitrite.

 

Physical Properties: CS402PD-5

Form:

Liquid

Color:

Light Red

Odor:

Slight Aromatic

pH:

12+/-

Density:

11.09#/gallon

Specific Gravity:

1.32

Freeze Point:

Approximately 32° F

Freeze/Thaw Recovery:

Complete

Ship Class:

Non Regulated

 

 

Contains:

Sodium Hydroxide/Sodium Nitrite

   

 

 

 

 

 

Refer to the SDS for further health, safety and environmental information regarding this product. Information and recommendations in this bulletin are based on information believed to be reliable. However, the use of the product is beyond the control of Cannon Water Technology Inc. and no guarantee, expressed or implied, is made as to the effects of such the results to be obtained if not used in accordance with directions or established safe practice. The buyer must assume all responsibility, including injury or damage, resulting from misuse of the product as such, or in combination with other material.

 

Chill, Hot and Condenser Closed System Treatment: One Gallon Treats 100 gallons of water. Simple to test. Protects Iron, Steel, Brass and Copper. Contains a visible red dye. Ships by common carrier like UPS, FedEx or DHL. Non Regulated Material. 

 

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Shipping & Returns

Returns Policy

All returns must be authorized by Cannon Water Technology. Call Cannon Water Technology to obtain a return authorization number before shipping back to Cannon Water.

Buyer is responsible for return freight fees. A 15% restocking fee may apply. If the manufacturer has a higher than 15% restocking fee the higher amount will apply.

Cannon Water Technology will replace any defective or non working DOA (Dead On Arrival) equipment with same or like equipment within 30 days of receipt of equipment, except where items are on back-order and are needed to complete initial order. Thirty day return policy will go into effect when all equipment ordered is received. Cannon Water Technology will reimburse shipping fees only when item is deemed defective or non working DOA.

All returns must be in original packaging with all parts and manuals in resale-able condition. Any returned items not in resale-able condition, missing parts or manuals will be charged a 25% re-manufacture fee.

Under no circumstances can equipment that has been used for chemical service be returned for credit. We will make every effort to help you select the proper equipment before you purchase it.

If you have any questions about your application we can help you make the right choice. Call us at 1 800-230-1426 to speak with a technical support representative.

To obtain return authorization call us at 1 800-230-1426 or contact us in writing via e-mail: csd@cannonwater.com

Shipping Policy

You can trust that your order will be quickly processed and safely delivered. We can ship products anywhere in the United States, Canada and most countries using the shipping method of your choice. Please note that UPS cannot ship to post office boxes. When you place an order we will estimate delivery dates based upon the availability of your item(s), shipping method selected and your shipment's destination.

Processing Times

Most orders ship the same day if items are in-stock in our main California warehouse. Since we drop ship some products there may be a slight delay before orders actually ship out. We consider standard lead times to be within 3 days of order. In the event that a longer lead time is needed, we will do our best to keep you informed of these delays.

Credit Cards:

We only accept credit cards issued by USA Banks. International customers can use their credit cards via PayPal when checking out. PayPal does not require an account, just use the guest checkout with your debit or credit card.

Know more about Shipping Policy
Comments
Questions & Phone Orders

Questions & Phone Orders

233 Technology Way Suite 9
Rocklin CA 95765
Call us: 916-315-2691

Shop with Confidence

Shop with Confidence

Your purchase is protected with industry leading security. Your information will always be kept private and only be used by Cannon Water Technology to process orders.

30 Day Moneyback Guarantee

Our Shipping Policy

We can ship products anywhere in the United States, Canada and most countries using the shipping method of your choice.

View shipping policy »

Back to Top