Lakos ILB Series Sand Separators, Carbon Steel Hydrocyclone Centrifugal-Action Separators for Low-Flow Applications

These water well sand separators are available in both carbon steel and stainless steel material constructions. At Cannon Water, LAKOS versatile low flow rate filtration solution is available in the following specifications.

• Maximum Pressure Rating: 150 psi ()10.3 bar)
• Pressure loss Range: 5 – 12 psi (0.3 – 0.8 bar)
• Purge Size (All Moels): 3/4 N.P.T., Male
• Maximum Particle Size
  • Lakos ILB-0037: 1/4″ (6.35 mm)
  • Lakos ILB-0050: 1/4″ (6.35 mm)
  • Lakos ILB-0075: 1/4″ (6.35 mm)
  • Lakos ILB-0100: 1/4″ (6.35 mm)
  • All the other models (Lakos ILB-0125, Lakos ILB-0150, Lakos ILB-0200, Lakos ILB-0250, Lakos ILB-0300): 3/8″ (9.25 mm)
• Collection Number Capacity:
  • Lakos ILB-0200: 0.8 U.S. gal (3.03 liters)
  • Lakos ILB-0250: 1.25 U.S. gal (4.73 liters)
  • Lakos ILB-0300: 2.2 U.S. gal (8.33 liters)
  • All other models: 0.3 U.S. gal (1.2 liters)
• Construction:
• Shell material and head material of 0.135 inch wall or better
• Paint Coating: Acrylic Urethane, Spray-on, Royal Blue

Automatic Purging:

For systems that have a lot of sand it may become necessary in install an automatic purge valve. This can be accomplished in several ways. We offer several options to automatically drain the sand separator. 

Systems for purging:

• EzPurge: The EzPurge should be used in systems that do not have a pressure tank. The valve will open for several seconds each time the well pump turns on.  
• DigiPurge: The DigiPurge offers the most flexibility over all of the systems we offer. This system can be programmed to operate the valve in many ways. 
• AccuPurge: This valve has a built in repeating interval timer. Simple design, reliable, good for in-door applications
• CW-07-MBV, Heavy duty motorized ball valve with repeating interval timer, good for indoor or outdoor applications 

Bracket Kits : Take the hassle out of mounting the separator by using one of our pre-made bracket kits 

Visual Purge Kit : See how much sand is building up in the system with a clear section of pipe. 

Manual Purge Kit : One stop shopping is our goal. Get a manual purge kit now and save a trip to a big box store.

LAKOS separators are the popular choice for removing sand from home or ranch water supply due to their several beneficial features as mentioned below:

• They guarantee maintenance-free and long-term operation owing to their construction and fewer moving parts.
• These sand separators help save labor, as there are no screens, cartridges, cones or filter elements to clean or replace.
• No extensive back-flushing; this helps minimize water/liquid loss to a large extent.
• They are robustly designed to offer continuous operation without routine shutdowns for cleaning or maintenance.
• They assure optimum performance without troublesome pressure fluctuations.
• These easy-to-install centrifugal sand separator can be availed with an automatic purge valve for maintenance-free operation and a compact valve for normal to heavy-duty purge requirements.
• These compact and space-saving profiles reduce maintenance costs by 60% - 90%, energy and chemical consumption by 10% or more, and water consumption by 3% - 5%.

The separators are designed with a tangential inlet, and mutually tangential internal accelerating slots. The purpose of these parts is to provide proper velocity required to remove the sand particles and other fine debris efficiently from the pumped/pressurized liquid system. An internal vortex is also designed to support the process without causing any wear/damage to the accelerating slots.

Unwanted solids from the water/liquid systems get into the solids collection chamber by spiral downward along the perimeter of the inner separation barrel. The collected debris then go spirally upward to the separator outlet through the center vortex in the separation barrel.