Stenner Water Meters

The plastic and stainless-steel water meter utilizes a reed switch that provides a pulsing dry contact signal. The meter sends a signal to actuate the pump to dose according to the water volume. Both are certified by IAPMO to ANSI/NSF 372, low lead.

Sidebar Sidebar Sidebar
Compare 0

Stenner Plastic Water Meter Specifications:

  • Accuracy: ±2% when operating between minimum and maximum flow range
  • Temperature Range: 35-122°F (1.7-50°C)
  • Pressure Ratings: 15-100 psi (1.0-6.9 bar)
  • Maximum Current: 20mA
  • Maximum Voltage: 24VAC or 24VDC
  • Sensor: Reed Switch
  • Cable Length: 6 ft (1.8 m)

Plastic Water Meter Materials of Construction:

  • Body: Engineered reinforced plastic (nylon)
  • Internal: Engineered thermoplastic
  • Magnet: Alnico

Stainless Water Meter Specifications:

  • Accuracy: ±1.5% max. flow rate when operating between minimum and maximum flow range
  • Temperature Range: 35 -122°F (1.7 -50°C), protect the meter from freezing
  • Maximum Operating Pressure: 150 psi (10.3 bar)
  • Maximum Current: 20mA
  • Maximum Voltage: 24VDC or VAC
  • Sensor: Reed switch, dry contact type, normally open
  • Cable Length: 6 ft (2 m)

Stainless Water Meter Materials of Construction:

  • Body: Stainless Steel
  • Internal: Engineered thermoplastic
  • Magnet: Alnico

Vertical Positive Displacement (VPD) Water Meter Specifications:

  • Accuracy: ±2% max. flow rate when operating between minimum and maximum flow range
  • Temperature Range: 35 -122°F (1.7 -50°C), protect the meter from freezing
  • Maximum Operating Pressure: 150 psi (10.3 bar)
  • Maximum Current: 20mA
  • Maximum Voltage: 24VDC or VAC
  • Sensor: Reed switch, dry contact type, normally open
  • Cable Length: 6 ft (1.8 m)

VPD Water Meter Materials of Construction:

  • Body: Engineered reinforced plastic (nylon)
  • Internal: Engineered thermoplastic