Lakewood Instruments Model 3175 Conductivity Cooling Tower Controller

Overview

• Accurately controls boiler and cooling tower conductivity. A standard secondary input may be used to control ORP or pH.
• Easy to program with an intuitive menu to configure for either cooling tower, boiler, or condensate applications with appropriate conductivity sensors.
• Larger 7” responsive touch screen display for quicker setup compared to using a keypad.
• Updated processor for modern connectivity and datalogging.
• Email alarm notifications.
• Reliable circuitry that has been proven for two decades to accurately control your water chemistry.
• User-selected relay options for a high level of application flexibility.
• Configure relays to your preference – for setpoint control, based on water meter, percent of blowdown or percent of time.
• Up to 12 scheduled feeds can be configured for excellent control of your system.
• Affordably priced between our Model 1575e and NexSys water treatment control systems.

Features

• 7” color touchscreen display.
• (5) Output relays with 1 typically used for the bleed/blowdown, plus 4 chemical feeds.
• (2) Water meter inputs
• (2) drum switch inputs
• (1) conductivity input
• (1) flow switch input
• (1) 4-20mA input
• (1) 4-20mA output
• Data logging with onboard historical graphs and .csv file output.
• Ethernet capability.
• Remote communications.
• Email notification of alarm conditions.
• Removable power cord and receptacles for conduit installations. Enclosure is rated NEMA 4X.
• Single circuit board for high reliability and lower cost.
• Large shallow enclosure for easy wiring.
• Ball valve delay feature allows accurate control of motorized ball valves.

Specifications

• Model: 3175
• Conductivity range: 50-10,000 μS
• Conductivity sensor: 2 electrode
• Conductivity Resolution: ± 10 μS (conductivity <5000 μS) / ±100 μS(conductivity > 5000 μS)
• Temperature comp.: 500NTC, NONE
• Accuracy & repeatability: ± 1.0%
• Deadband/Setpoint: Programmable
• Auto/Manual outputs: Menu selectable
• Interface: 7 inch capacitive touchscreen
• Drum Switch Inputs: 2 digital contact inputs
• Water meter inputs (2): Contact head, paddle wheel, or turbine
• Timers: Max. blowdown time exceeded and relay run time exceeded
• Output Signal: One 4 – 20 mA, isolated or non-isolated optionally powered output for conductivity
• Input Signal: One 4-20 mA, non- isolated internally powered input for conductivity
• Output relays: 5, 4 selectable use, 1 blowdown
• Relay ratings: 3A each, 10A total
• Power: 120/240 VAC 50/60 Hz
• Ambient: 32° – 120°F (0 – 49°C)

Downloads

• Quick Start Guide: Model 3175 Water Treatment Controller Ethernet Port Summary & Email Setup
• Quick Start Guide: Model 3175 Water Treatment Controller Micro SD Card Usage & Procedures
• Cutsheet: Model 3175 Water Treatment Controller

Cooling Tower Water Treatment Controller Application

• Product Manual: Model 3175 Cooling Tower Water Treatment Controller
• Quick Start Guide: Model 3175 Cooling Tower Water Treatment Controller